Fire Fighting Suit Precautions

(1) Fire-fighting chemical protective clothing must not come into direct contact with flames and molten materials.
(2) Before using fire-fighting chemical protective clothing, you must carefully check whether the clothing is damaged. If there is any damage, it is strictly prohibited to use it.
(3) When using, you must pay attention to the tight fit of the hood and the mask, and the neck buckle and the large white buckle on the chest must be fastened to ensure that the neck and chest are airtight. The belt must be tightened to reduce the "bellows effect" during exercise.
(4) After each use, wash with soapy water or 0.5-1% sodium carbonate aqueous solution according to the degree of dirt, then rinse with clean water, place in a cool and ventilated place, dry and then package.
(5) When folding fire-fighting chemical protective clothing, lay the hood opening upward on the ground. Fold back the hood, neck buckle and sleeves, then fold the clothing vertically, overlap the left and right sides, with the two boot tips facing outward, put the gloves in the middle, roll the boot soles relative to each other, and put them horizontally into the chemical protective clothing packaging bag.
(6) Fire-fighting chemical protective clothing must not be exposed to heat or sunlight during storage, and must not come into contact with active chemicals and various oils.